Tubing Blocks
Tubing Blocks
Designed for machine mitering, also useful for general workholding. Machined to exacting tolerances from 6061 aluminum and supplied with two M6 clamp bolts. Smallest three sizes have outside dimensions 2" x 2"; 1.375", 36mm and 1.500" blocks have outside dimensions 2.25" x 2.25." Please inquire for any size not listed below.
Tube diameter
$ 30.00
×
Front Derailleur Boss Locating Jig
Front Derailleur Boss Locating Jig
This is a huge time-saver. Modern drivetrains require the FD boss accurately placed in accordance with their specs. This steel and aluminum jig places a front derailleur boss 9mm inboard of the BB face and 8.7mm forward of the seat tube centerline, while holding the boss parallel to the seat tube for brazing. Reversible plate allows for 1-1/8" and 1-1/4" seat tubes. Rod is 10mm diameter to match most front derailleurs. Always check the manufacturer's specs for proper FD boss location. Spring clamp not included. Most FD bosses will require some cold setting or filing to achieve the correct location, and this tools also acts as a quick gauge to determine whether the positioning is correct.
$ 175.00
×
Braze-On Jig
Braze-On Jig
Locates and aligns cable stops and housing guides. Aluminum blocks clamp securely to the tube with thumbscrews. Steel bar locates in slot, so turning the bar around without unclamping the blocks aligns stops at both ends of a tube. Steel bar has one wedge and one channel to work with a variety of braze-ons
$ 135.00
×
Tapered Tube Clamp Block Set
Tapered Tube Clamp Block Set
Holds tapered stays and fork blades for machine or hand work. CNC machined from 6061 aluminum with vee groove parallel to the flat faces. Assembled block pair is about 2"x2"x2". Shown with 12.5mm tip fork blade (not included).
$ 55.00
×
Round End Dummy Axle
Round End Dummy Axle
3/4" diameter, machined from stainless steel, threaded M6 on both ends.
End diameter
Length
$ 25.00
×
Keyed End Dummy Axle
Keyed End Dummy Axle
3/4" diameter, machined from stainless steel, threaded M6 on both ends. Purchase one keyed axle for $45. All additional keyed axles are $35 each.
Add to cart
Key width
Length
$ 45.00
×
Water Bottle Boss Drilling Guide
Water Bottle Boss Drilling Guide
Centers your drill on the tube and provides accurate 2-1/2" hole spacing. Works with tube diameters from 3/4" to 2". CNC machined of aluminum and steel, with hardened steel 1/4" drill bushings for a lifetime of use. Hint on using: after the first hole is drilled, insert a 1/4" drill bit or rod in the first hole while the second is being drilled.
$ 85.00
×
Fork Bending Die
Fork Bending Die
Please specify radius or contact me to discuss your needs. Machined from solid aluminum billet and supplied with clamp block, clamping bolts and adjustable stop. Three M10x1.5 holes on the bottom face for mounting. Lead time is 2-3 weeks.
$ 195.00
×
Stem Jig
Stem Jig
For brazing or welding stems. Tube sections are precisely located with special rings which also help minimize heat distortion. For $525, purchase a stem jig complete with six interchangeable bar and steerer ring pairs (two 1", one 26 mm, one 1-1/8", two 1-1/4"). Or for $375, purchase a jig with your choice of two diameters of ring pairs, one for the steerer and one for the bars. All common diameters are available. Back-purge and quill stem options available.
Stem jig set
Ring diameters (small set only)
Stem option
$ 0.00
×
Additional Stem Jig Ring Pairs
Additional Stem Jig Ring Pairs
All common diameters are available.
Enter ring pair diameter
$ 45.00
×
Seat Stay & Chain Stay Mitering Jig
Seat Stay & Chain Stay Mitering Jig
For use in a drill press or milling machine. $435 includes one dummy axle and one set of seat stay clamp blocks. Specify dummy axle length and stay clamp block size. For stay sizes not shown below, please contact me. I can make any size you might need.
Dummy axle length
Select stay clamp block size:
$ 435.00
×
SS & CS Mitering Jig Extra Dummy Axle
SS & CS Mitering Jig Extra Dummy Axle
Dummy axle length
$ 45.00
×
SS & CS Mitering Jig Extra Clamp Block Set
SS & CS Mitering Jig Extra Clamp Block Set
$ 50.00
×
Bottom Bracket Post
Bottom Bracket Post
For use in frame inspection and alignment. Machined from stainless steel, heat treated to Rc58-62 for wear resistance, supplied with a 1/2-13 tapped hole on the bottom to mount to your flat surface. Sized to work with Park Tool #681 and #682 threaded inserts (parts of the Park Tool BFS-1). Inserts are not included and are not essential, but can be helpful for alignment.
$ 325.00
×